Free shipping for specific products

Shopping cart

Your cart is currently empty

About the Motor of Electric Scooter

About the Motor of Electric Scooter

It may happen, you may notice that your electric scooter is not working properly. You were ready to go for a ride and forget about everyday problems, but you suddenly found that your electric scooter engine is not working properly. Surely you should maintain your electric scooter very carefully. Generally, electric scooters are built to last a long time. They also require minimal maintenance. But like other vehicles, electric scooters have parts and components that are sensitive to damage. The damage can come from overuse, overload and stress due to extreme riding activities causing various results like malfunction, melting or even burning out of different components of electric scooters. After reading this article, you will at least have some basic knowledge of how to fix an electric scooter, or you could become an expert at it! So, read this article carefully and save it for reference.

 

How to Fix an Electric Scooter Motor

 

Fixing an electric scooter sometimes can be not as hard as we think. The fact that adult electric scooters have fewer parts that could malfunction and are therefore simpler to maintain is one of its benefits. However, keep in mind that if you don't properly maintain your e-scooter, you could still run into serious problems. Therefore, be aware of the maintenance requirements for an e-scooter, particularly for the motor, before you purchase one online.

Your e-motor scooter is a crucial component, and if it is damaged, your e-scooter will not function. What should you do, therefore, if the motor cuts out or if it operates but the other parts don't? Here is a simple tutorial on how to fix the motor on an electric scooter.

The electric scooters use different types of motor, mainly- the hub motor or the electric motor. The motors are generally incorporated into the rear or front wheel. This doesn’t change the basic structure or design of the scooter.

The motors are very easy to install and access for service and repair. You can also turn off the motor and run your electric scooter like a kick scooter. The motor just moves along with the wheel without any influence on the motion.

 

Fundamentals about your electric scooter's motor

 

Learn the fundamentals about your electric scooter's motor before diving into the problems. The majority of e-scooters run on an electric or hub motor. It is the source of the e-power, scooter so a more powerful motor translates to a more capable e-scooter.

An e-front scooter or back wheel is connected to the motor, which is available in a variety of styles and forms. A geared hub motor and a brushed motor are the two different types of hub motors.

 

If the Electric Scooter Motor Doesn’t work properly.

The measures you can take if your electric scooter's motor won't start when you switch it on are listed below:

 

Look for wires and components that have burned or melted

 

The cables and other e-scooter parts may burn if the engine is overworked. Check the motor's wiring and any attached parts, such as the speed controller.

A burning plastic odor could indicate that the coils became too hot. The controller will also be impacted if this occurs. The motor thus halts operation.

To solve the problem right away and avoid more components melting or burning, replace the motor, wiring, speed controller, or the burned part.

 

Check for frayed or loose wires or wire connectors

 

If there are no burns visible or odorous, the motor's wiring connections may be loose. You probably don't realize how typical this is.

Gently pulling on the wires is one approach to locate a loose wire. The frayed wire is simple to remove. As you tug on a wire, you could also feel that it is not stable. Once you've located the loose wire, firmly secure it before checking the operation of your motor.

 

Check the scooter battery

 

Since the motor is powered by the battery, it may not run if the battery is destroyed. So check the battery for any damage.

Start by connecting the battery or e-scooter to an electrical outlet and determining whether it is charging the battery. The battery has to be replaced if the charger's light indicator illuminates but there is no increase in power from the battery.

However, if the charger's LED indicator flashes or is inoperable, the issue is with the charger. Visit your merchant right away to purchase a new charger. To avoid issues, make sure to use an official battery charger made especially for your e-scooter.

Here is a simple guide on how to charge your electric scooter properly if you are unsure if you are doing so.

 

Check the brake lever switch

The speed controller receives information about when to apply the brakes from the brake lever. However, when an e-brake scooter's lever becomes worn down, it locks the device in place and prevents the wheels and engine from turning.

You would need to open your e-scooter to reach the controller in order to determine whether the brake lever is the issue. Then, check to see if the e-scooter will run after detaching the brake lever from the controller.

The brake lever needs to be changed if the e-scooter operates. The lever is in good functioning order if the e-scooter still won't start. Additionally, you should take the electric scooter to a repair for additional testing or a new motor.

 

Inspect the motor

 

Although it is actually quite uncommon, a motor malfunction or breakdown is nevertheless a possibility. One typical cause of a motor malfunction is humidity. It's possible for the engine to get damp and stop working. Therefore, you should replace the motor if you see any signs of rust or dampness.

 

Visit a mechanic with your electric scooter

 

Bring your electric scooter to your local repair shop or e-scooter merchant to get it checked if the motor is still not working or if you are unsure of which wiring and components to adjust. In the end, it's preferable to consult a specialist with these kinds of problems for your safety and to prevent further harm to the e-scooter.

 

If an electric scooter's motor is running but the vehicle is still stationary

You can use these electric scooter troubleshooting guidelines to evaluate the state of your e-scooter motor if the motor runs but the scooter is immobile.

 

Verify the power delivery system

 

Compared to fuel engines, the single-speed gearbox used by electric scooters is effective enough to assist the vehicle acceleration. You may need to inspect the e-power scooter's transfer system if it is running but not moving.

Check if it has missing parts or if it doesn’t function properly. Issues in power transmission may be caused by a rear-wheel freewheel clutch that has worn out, a missing or damaged chain or belt, or a missing or damaged chain sprocket or belt cog. Inspect these parts to narrow down the cause.

 

Properly affix the e-scooter chain or belt

 

One of the two drive systems—a chain drive or a belt drive—is employed by the motor. The chain and two gears (a pinion and sprocket) make up the chain drive. Some e-scooter motors connect the engine and drive the pinion directly. A belt drive system, on the other hand, substitutes a belt for a chain.

Verify that the chain or belt is properly attached to the two gears by checking its installation. As soon as you do, check to see if the wheels are turning before testing it again.

 

If the motor, chain, and belt are operating but the rear wheel is not moving

 

If it does, it indicates a problem with the back wheel freewheel clutch. Bring it to a mechanic so they may examine it further and replace or repair it.

 

If the motor is on, but the chain or belt is not, and the back wheel is not spinning

 

The most frequent causes of this include a chain or belt falling off, a lack of tension in the belt, or a damaged, missing, or sloppy cog or sprocket. Look for these problems in these areas.

 

Bring your electric scooter to the shop

 

Bring the e-scooter to your neighborhood mechanic right away if the measures above don't help resolve the problem. To protect your safety and the safety of your e-scooter, never attempt to repair critical components on your own. Instead, always seek professional assistance.

 

Where to go to get your electric scooter fixed

 

To get your e-scooter fixed, visit the service center of your store. If you require quick assistance, locate the closest repair facility for electric scooters in your neighborhood. E-scooter repairs may be accepted at EV and e-bike shops.

Finally, at the end of this article about how to fix an electric scooter, we hope you could gain a good amount of insights about your e-scooter. And we also hope that now you can fix your scooter’s minor problems all by yourself and ensure better safety.